-
-
Pre Drilled and Slotted Spinners (6)
- We have some of the spinners already drilled for DA motors. They are slotted for Menz style props and should be a bolt on and play. This eliminates the delay of getting the spinner cut and drilled so we can usually ship the same day.
-
-
Spinner 10-32 Center Screws (4)
- Here we have a full selection of Spinner bolts. These are much better than fully threaded screws and cheaper than the same bolts other spinner makers offer.
-
-
Spinner Accessories (2)
- Here we have Carbon Fiber Spacers for the 10mm hole in the spinners to make them 8mm. And there are longer ones available to fit the 10mm hole in the larger props to make them 8mm. This works on the larger electric motors swinging the Menz style props.
-
-
Standard Composite Spinners (6)
- This is by far the most economical way of getting the best composite spinner. You will need to drill the backplate for your motor. And slot the spinner for your prop. Check out our Information Department for help on drilling and slotting.
